Serving the Tulsa area  ·  (918) 550-4298  ·  Open Mon-Sun 7am-7pm
📞 (918) 550-4298 Free Quote

Metal Roofing in Sand Springs, OK (74063) · Local Professionals

Tulsa Metal Roofing · Fast response in Sand Springs and the Tulsa area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sand Springs is a river town with working roots, and the roofs here show it. From the older homes and shops along Broadway and the streets near the Arkansas River to the barns, stables, and workshops out toward Keystone, metal roofs take a beating from hail, wind, and ice.

If you own a home or property in the 74063 ZIP code, you have probably seen faded panels, loose fasteners, or a leak that shows up every spring. We are Tulsa Metal Roofing, and since 2009 we have helped Sand Springs homeowners and property managers fix those problems with metal roofing that is built for Green Country weather. We are a Metal Roofing Alliance member and fully insured, and we know the local housing stock, from older bungalows to newer builds near the river.

Metal Roofing in Sand Springs (74063)

Sand Springs sits along the Arkansas River where the land rolls into the Green Country hills, and that means properties here deal with grade, drainage, and wind exposure that flatland subdivisions do not. Older homes and commercial buildings near downtown often have low-slope or modified roofs that are candidates for a metal retrofit, while barns, stables, and shops on the outskirts need durable panel roofs that can handle dust, animal waste, and wide temperature swings. The soil here holds moisture after heavy rain, so we pay close attention to flashing, gutter sizing, and how water leaves the roof, especially on properties with mature post oaks and elms that drop limbs and debris. Hail is the big one: spring supercells roll through and can dent or loosen fasteners on older metal roofs. We have been serving Sand Springs and the Tulsa area since 2009, and we have seen just about every roof type and failure mode this town has to offer.

Our crews are experienced with the mix of housing stock here, from mid-century ranches to newer two-story homes, and we understand how local codes and historic district rules can affect panel profile and color choices. We also work with property managers and commercial owners who need minimal disruption and clear communication.

Our services in Sand Springs

How a Job Works in Sand Springs

Step 1: You call us at (918) 550-4298 or request a free estimate online. We schedule an on-site assessment at your property in Sand Springs, where we inspect the roof, check for leaks, loose fasteners, and storm damage, and talk through your options. You get a written estimate with clear pricing, no pressure.

Step 2: Once you approve the scope, we handle the work. That includes pulling the required roofing permit through the local building department and coordinating any inspections. If your property is in a historic district or HOA, we help you understand design review requirements before we order materials. On tight lots or properties with steep grades, we plan staging and access carefully so we do not tear up landscaping or block neighbors.

Step 3: When the job is done, we clean up thoroughly, haul away old materials, and walk the property with you to make sure you are satisfied. We do not leave until the site is clean and you know how to care for your new roof.

Pricing for metal roofing in Sand Springs depends on the size and complexity of your roof, access, the condition of the existing structure, and how soon you need the work done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and metal roof over shingles (retrofit) from $7. Repair work starts at $450 for leaks and general repairs, screw replacement and re-fastening from $750, and coating and painting from $2.50 per square foot. Flashing, chimney, and skylight repairs start at $600, and gutters for metal roofs start at $9 per linear foot. We offer free estimates and free inspections for storm damage, so call (918) 550-4298 to get a real number for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sand Springs and nearby areas.

My barn near Keystone has an old corrugated metal roof that is rusting through. Can you replace it with something more durable?
Yes. We install corrugated and ribbed panel roofing starting at $5.50 per square foot, and we can also do metal roof over shingles or a full tear-off if the structure needs it. For barns and stables, we often recommend heavier-gauge panels and proper fasteners that resist corrosion from animal waste and moisture. We will inspect the purlins and framing to make sure the new roof has solid support.
A storm just blew through Sand Springs and lifted some panels on my roof. How fast can you get out?
We prioritize storm and wind damage repairs and offer free inspections. Call us at (918) 550-4298 and we will schedule a visit as soon as possible, usually within a day or two depending on demand. We can tarp or secure the roof temporarily if needed and then give you a written repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot house in Sand Springs?
For a basic metal roof replacement, you are looking at roughly $9 per square foot and up, so a 1,500 square foot roof might start around $13,500, but the actual price depends on pitch, access, the number of penetrations, and whether we need to remove existing layers. Standing seam and stone-coated steel cost more. We provide free estimates so you get an accurate figure for your specific roof.
Do I need a permit to replace my roof in Sand Springs, and can you handle it?
Roofing permits are commonly required for a full replacement or re-roof in Sand Springs, and the rules vary by jurisdiction. We pull the permit for you and coordinate inspections with the local building department. You can also check general information on the City of Sand Springs website, but we will guide you through what is needed for your project.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
Property line overhangs and drainage onto a neighbor's lot can be sensitive. We recommend checking your plat and local setback rules, and talking with your neighbor before work starts. If you are in an HOA, review the architectural guidelines first. We can adjust gutter and flashing details to keep water on your property as much as possible.
Are you fully insured for work at my Sand Springs home?
Yes. We carry general liability insurance and workers' compensation coverage for all our crews. We are happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Sand Springs to survive hail and ice storms?
We recommend an annual inspection, especially after hail season in spring and before winter. Check for loose or missing fasteners, damaged panels, and debris in gutters. Snow guards and ice protection can help prevent ice damming at the eaves, which is common on homes with steeper roofs. Coating and painting can extend the life of older metal roofs. Call us to schedule a maintenance check.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tulsa

All your work handled by qualified professionals in Tulsa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Tulsa

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tulsa · Response within 24h · No commitment · ☎ (918) 550-4298

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tulsa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm