Serving the Tulsa area  ·  (918) 550-4298  ·  Open Mon-Sun 7am-7pm
📞 (918) 550-4298 Free Quote

Metal Roofing in Skiatook, OK (74070) · Local Professionals

Tulsa Metal Roofing · Fast response in Skiatook and the Tulsa area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Skiatook is a lake town with real weather. Homes around Skiatook Lake and out along Highway 20 take some of the hardest wind and hail Green Country can throw, and the older brick ranches closer to downtown have seen decades of it. If your roof is showing lifted trim, missing fasteners, or granules in the gutter, it is time to look closer.

We are Tulsa Metal Roofing, and we have been working Skiatook and the surrounding Tulsa area since 2009. From lakefront properties near Skiatook Lake to farmhouses and barns out in Osage County, we install, repair, and replace metal roofs built for Oklahoma storms. Call (918) 550-4298 for a free estimate.

Metal Roofing in Skiatook (74070)

Skiatook sits in rolling Green Country terrain, with a mix of lake homes, acreage properties, and older in-town houses on varied lot sizes. The ground here can be rocky and uneven, and grade and drainage matter, especially on sloped lots near the lake where water runs fast during spring storms. We see a lot of post oaks and blackjack oaks close to the roofline, which means fallen limbs and debris are common after a blow. Tornadoes and straight-line winds are the big concern, and they tend to peel back loose edges, ridge caps, and trim before anything else. Ice storms like the one in 2007 also remind us that eave protection and proper flashing are not optional. Many Skiatook homes have low-pitched roofs or complex rooflines, and we match the panel profile and fastening method to the actual structure, not a one-size-fits-all approach.

Our team has served Skiatook and the Tulsa area since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation, so you are covered when we are on your property.

Our services in Skiatook

How a Job Works in Skiatook

Step 1: You call (918) 550-4298 or request a free estimate online. We schedule an on-site assessment at your Skiatook property, inspect the roof, flashing, fasteners, and attic if accessible, and talk through what we find. You get a clear written estimate before any work begins.

Step 2: Once you approve, we handle the work. On tighter in-town lots or lake properties with limited access, we plan material delivery and staging carefully. If your project needs a roofing permit, we point you to the City of Skiatook website for the current requirements and inspections, since rules and fees can change. For homes in an HOA or historic review area, we help coordinate color and profile approvals so there are no surprises.

Step 3: We clean up daily and do a final walkthrough with you. Magnets sweep the yard for nails, gutters are checked, and we make sure you know what was done and how to care for the new roof. We leave your property clean.

Pricing in Skiatook depends on the size and pitch of your roof, access, the condition of the existing decking, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, and stone-coated steel or metal shingle roofing starts at $9. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Storm and wind damage inspections are free. These are starting figures, not a final quote. Call (918) 550-4298 for a free estimate at your Skiatook property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Skiatook and nearby areas.

My Skiatook Lake home has trees close to the roof and I keep finding debris. What is the best metal roof for that?
For lake-area homes with overhanging post oaks and blackjack oaks, we often recommend a standing seam or corrugated panel with a smooth finish that sheds debris and resists dents. We also check gutter sizing and add snow guards or ice protection where needed. A free inspection lets us look at your tree cover, pitch, and drainage before recommending a profile.
A storm just peeled back some panels on my roof in Skiatook. How fast can you get out?
We prioritize active leaks and wind damage in Skiatook and the surrounding area. Call (918) 550-4298 and we will schedule a free inspection as soon as possible, often the same week. We can tarp or secure loose panels to prevent further water intrusion while you wait for repairs.
What does a typical metal roof replacement cost in Skiatook?
Most full replacements in Skiatook fall in a range based on square footage and roof complexity. As a starting point, metal roof replacement begins at $9 per square foot, with standing seam at $10 and corrugated panels at $5.50. Factors like decking repair, access, and whether we remove the old roof will affect the final number. We provide a written estimate after inspecting your roof.
Do I need a permit to replace my roof in Skiatook?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. We recommend checking with the City of Skiatook through the Tulsa County website for current rules before work starts. We can help you understand what is typically required, but the local building department has the final say.
My neighbor and I share a property line and my new metal roof will overhang slightly. What should I do?
Property line issues are best resolved before installation. We can adjust the roof layout or gutter placement to stay within your side of the line. If your neighborhood has an HOA, we also help coordinate approval for panel profile and color so you are not stuck redoing work.
Are you insured for roofing work at my Skiatook property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your Skiatook home or commercial property.
What maintenance does a metal roof need in Skiatook's climate?
In Skiatook, the main things are keeping debris off the roof and out of the gutters, checking fasteners and sealant after hail or high wind, and watching for ice damming at the eaves in winter. We recommend an inspection after major storms and every couple of years. A coating or paint refresh can extend the life of older panels.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tulsa

All your work handled by qualified professionals in Tulsa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Tulsa

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tulsa · Response within 24h · No commitment · ☎ (918) 550-4298

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tulsa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm